System RequirementsEmailRush, FaxRush, ShipRush Server, PrintRush and CashRush are part of the OmniRush® family. All these products are installed by a single installer and managed via a single console (the OmniRush Administrator).
For a friendly discussion of a good starter OmniRush Server PC, see the discussion.
Minimum Required Hardware (for a basic, low volume system)
|
|
OmniRush Server PC* |
Client PC's (for OmniRush Client Utilities)* |
|
CPU |
Pentium II, III, IV (or equivalent) 900 mhz or higher* |
Pentium III 600 or higher* |
|
RAM |
256MB** |
Windows 2000 / XP: 196MB** |
|
Disk Space
|
1 GB Free Space minimum (program occupies approx 175MB, free space required for data)* |
75 MB Free space, 60MB of which for program, balance for temporary work files* |
|
Operating System* (see the Windows Version Support Matrix for full details.) |
|
|
|
If Installing the FaxRush for Hardware Fax |
No hardware required on workstations | |
|
Other Modules |
· Microsoft Word (version 2000, XP, or 2003) is required if OmniRush is used for merge-fax, print, and merge-to-pdf-and-email · Most modules have no hardware requirements. Check module documentation for specifics |
|
* The actual minimum depends on the CRM system in use. First refer to the recommended (not minimum) hardware for the target CRM system. If the CRM system requires more advanced hardware than OmniRush, follow the CRM system recommendation.
** These are minimums for a basic, one or two port OmniRush server used
for faxing and for no software other than OmniRush. Note that when OmniRush
is used with a CRM system (e.g. ACT!, GoldMine, SalesLogix, etc.) the
OmniRush Server PC must meet at least the minimum requirements of the
CRM software, which may require faster hardware than listed above. Note
that heavy workloads, more than three modules, or more than two fax lines
may require faster hardware.
Recommended Minimum Server:
1.1 ghz or higher, 512 MB RAM, 20 GB Free disk space, supported operating system
Brooktrout TruFax or TR1034 interface for hardware based faxing (Be sure to see the list of supported models)
For a friendly discussion of a good starter OmniRush Server PC, see the discussion.
In many cases, a dedicated PC is not required to run OmniRush. Powerful server PC's can run other applications in addition to OmniRush. See the Software Coexistence matrix for more information.
Recommended Minimum Server for Heavy Fax Loads:
2 ghz or higher CPU, 1GB RAM, 40 GB Free disk space, supported operating system
Appropriate Brooktrout fax board or internet fax account
System is dedicated to FaxRush
Other Requirements:
TCPIP must be installed on the Server PC. (See section on networking for details.)
Internet connectivity from the OmniRush Server PC is required. (See discussion in Internet Connectivity.)
Modules may have specific hardware and software requirements. See the section on the module for specific requirements.
The OmniRush Server Installer requires that a local C: drive exist on the OmniRush server, and that this drive is available for read and write.
The PC Name length is limited to 18 characters. If the PC name is longer than this, shorten the name and reboot before installing OmniRush.
Related Software:
Required:
IE5 or higher must be installed
ACT!2006 (aka v8), 2007 (aka v9) or 2008 (v10) or 2009 (v11) Standard or Workgroup (using either MSDE or SQL Server)
GoldMine v5.x or v6.x dBase or SQL (click here for SQL details) (aka GoldMine Front Office, GoldMine Sales & Marketing, GoldMine Business Contact Manager or similar)
GoldMine v7.x and GoldMine v8 (aka GoldMine Premium Edition) on SQL Server (click here for SQL details)
SalesLogix v4 (SalesLogix2000) or v5.x (SalesLogix.net), v6.x, v7.x
Microsoft Dynamics CRM v3
Oracle, Microsoft SQL Server, Pervasive or other SQL database for Open DBIO integration (custom programming and integration is the responsibility of the customer, not Z-Firm)
If OmniRush is going to integrate with ACT!, GoldMine
or SalesLogix, then the contact manager must be installed on the OmniRush
Server PC, with all required database drivers and client configuration
to attach to the production database. Always
install the CRM client software and test for proper operation before
installing OmniRush.
OmniRush licensing controls what systems OmniRush can
work with, and more.