Brooktrout: Sample digital.cfg file

Note, the below must be copied to Notepad and saved to the c:\<winndir>\bfax\ directory as file: digital.cfg  The text file must have no line wraps, and no extra carriage returns or blank lines.  

The text file in Notepad should look exactly as this screen looks when viewed full screen.

# The values on the first line are:

# MVIP/PEB,   Law,       Robbed bit,     Clock rate, Signal protocol, MF freq.

#   2=FXS

#  1=MVIP   1=u-law*  1=enable (w/PEB)*    1=MVIP    1=E&M IMMEDIATE        0

#  0=PEB*   0=A-law   0=disable (w/MVIP)   0=PEB*      0=E&M WINK*

# *=default, Note:A-law is for Europe only and should not be used in USA.

#

# setup for MVIP Mode, E&M Wink -

1 1 0 1 0 0

#

#

# The rest of the lines contain: channel, tstream, tslot, (rstream, rslot).

# Streams are ignored when using PEB. If you are using MVIP,  the tstream

# and rstream should match the MVIP stream selection on the TRNIC board

# (default is 6).

0 6 0 6 0

1 6 1 6 1

2 6 2 6 2

3 6 3 6 3

4 6 4 6 4

5 6 5 6 5

6 6 6 6 6

7 6 7 6 7

8 6 8 6 8

9 6 9 6 9

10 6 10 6 10

11 6 11 6 11

12 6 12 6 12

13 6 13 6 13

14 6 14 6 14

15 6 15 6 15

16 6 16 6 16

17 6 17 6 17

18 6 18 6 18

19 6 19 6 19

20 6 20 6 20

21 6 21 6 21

22 6 22 6 22

23 6 23 6 23