UPS Shipping Server

Requirements:

• Internet connectivity from the OmniRush Server.  Communication to the UPS is done with SSL on port 443.  (This is the standard SSL port.)  Check that your firewall allows SSL communication on this port.  (See the Technical Reference on proxy servers if needed.)

• Daily pickup account with UPS (have your six-digit, alpha-numeric shipper number handy, as it will be needed during configuration)

• Local or Network printer for labels: Laser printer or supported Eltron/Zebra label printer

• Local or Network printer for manifests: Laser printer

• (Note: Printers should be available in the Printers folder of the OmniRush PC)

Installation Steps:

1. Log in to the OmniRush Server PC as the Windows user which OmniRush will run under.

2. Install ShipRush Pro for UPS.  This can be installed either on the OmniRush Server PC, or on another PC (if installed on another PC, the ShipRush Client must be installed on the OmniRush Server PC). Click here to see the setup options.

3. If this is a new installation of ShipRush Pro for UPS, complete the ShipRush setup wizard. Select 'Stand Alone' for the contact manager. Commission the UPS account (this happens automatically at the end of the wizard).

4. If ShipRush Pro for UPS is already installed on the network, or will be installed on a system other than the OmniRush server: Install the ShipRush server, set it up as in the step above. Then install the ShipRush Network Client on the OmniRush Server.

5. Using the OmniRush Administrator, create a UPS shipping Module.  Set the module to type: UPS (via ShipRush)

6. Configure one or more tracks to feed the module.  The vast majority of configuration settings are set in the track.  See the Configuring UPS Shipping Tracks for details.